EN | IT | RU | LT

Sequential gas injection system of fourth generation

EGS NEO

EGS-Neo

 

Electronic multipoint gas injection system EGS  NEO    is intended for use in injector cars for LPG (liquefied petroleum gas) or CNG (methane) conversion with 3 or 4 cyl. It is applicable for full-group, semi-sequential, sequential petrol injection and single injection.

EGS NEO has new features:

-correction of injection time of any gas injector

-changeable threshold of RPM pulse processing

-possibility of working without RPM pulse

-check of  gas injectors operability

-software control of switching ON-OFF gas valve of reducer and multivalve

-recording and processing of MAP charts for petrol and gas

-mode of automatic continuous  correction of the system according to  data from MAP charts

-counters of operation time on petrol and on gas

-counter of technical maintenance  time with sending  sound signal to switch

-possibility to work with curves and factors table both

-simple separate tuning of injection times for bank 1 and bank 2

-mode of  emergency start on gas

The system  NEO  includes:

  • main unit in metal  case
  • wire harness with hermetic connectors
  • manifold absolute pressure (MAP)
  • reducer temperature sensor
  • gas temperaure sensor
  • change-over switch with LEDs
  • installation set